LANCOOLII-1X Vertical GPU Kit
Side Diffused LEDs Strip
LANCOOLII-3X Hot-swappable Back Plate
LANCOOLII-4X 3.1 Type C Cable
GB-001X Anti-sag GPU Bracket
In the condition of using the included riser cable (PCIE3.0) of the vertical GPU kit with a PCIE 4.0 motherboard and a PCIE 4.0 GPU, please follow bellow steps to set up your BIOS to make it compatible.
1.Make sure that your motherboard BIOS is the latest version. If not, recommend to update to the latest version.
2. Install your GPU directly to the motherboard and start.
3. Enter your BIOS, set the PCIE slot from “Auto” to “Gen 3”. (Example photo as below, for more please read the manual of your motherboard)
4. Save your settings and turn off the system
5. Install the PCIE 3.0 riser cable to the motherboard and the GPU, the system would be able to work.
|Model||LANCOOL II MESH RGB|
|Dimensions||(D) 478mm x (W) 229mm x (H) 494mm|
|Motherboard||E-ATX(width: under 280mm)/ATX/M-ATX/ITX|
|4.0mm tempered glass (both sides)|
|Fan Support||Front (multi-way fan/radiator bracket): 3 x 120mm or 2 x 140mm|
|Top: 2 x 120/140mm|
|Rear: 1 x 120mm|
|Above PSU Chamber: 2 x 120mm|
|Radiator||Front (multi-way fan/radiator bracket): 1 x 360/280/240mm|
|Top: 1 x 240mm (aligned to the left)|
|Drive||Behind MB Tray: 2 x 2.5? SSD|
|Behind the right flip panel: 2 x 2.5”SSD|
|Hard Drive Cage: 3 x 3.5? HDD/2.5? SSD|
|Above PSU Chamber: 2 x 2.5? SSD|
|I/O Ports||C button for color control|
|M button for lighting mode control|
|1 x TRRS AUDIO|
|2 x USB 3.0|
|1 x USB 3.1 TYPEC (Optional)|
|Dust Filters||1 x Top (magnetic), 1 x Bottom (tray)|
|Incl Fans||3 x included 120mm 3-PIN 1300 RPM ARGB fans|
|Rated Speed:1300RPM ±10 %|