The Lian Li Q58X3 TG Mini ITX Chassis with PCI-E 3.0 Cable Black features 2 x tempered glass and 2 x mesh side panel which are interchangeable, mesh top panel design with a two-tone front panel design with sandblasted and brushed aluminium, magnetic bottom dust filters, supports mini-ITX motherboards, supports SFX/SFX-L and ATX (max length 160mm) power supplies, radiator support at the top (in SFX PSU mode: up to 280mm, in ATX PSU mode: up to 120mm), bottom (up to 120mm in both modes), tool-less hot-swappable SSD tray, supports a graphics card of up to 320mm in length, and includes a PCI-E 3.0 riser cable.
The ultimate 14.5L mini-ITX chassis.
Craftsmanship in black and white
The mini-ITX chassis features exquisite aluminium craftsmanship, airflow – all while display the components.
Features a two-tone front panel design with sandblasted and brushed aluminium, creating a dual textured design.
Features a fully white-coated frame with silver screws, white USB 3.0 ports, and a white PSU cable extension.
Swappable hinge panels
The dual sided split hinged panels feature two 3.0 thick tempered glass panels and two 1.0mm fine mesh panels that are swappable.
The Q58 can accommodate both the airflow and the look of your choice.
Top tempered glass / bottom mesh
Top mesh / bottom tempered glass
Full mesh side panel
Full tempered glass side panel
Modular design for SFX/ATX power supply
The Lian Li Q58 is compatible with both SFX and ATX power supplies. It includes an additional bracket to transform from SFX PSU mode to ATX PSU mode.
Details make perfection
Build like a pro - avoid glass damage
The hinged glass panel features a curved hole at the rear, which allows users to open the panel without removing the thumbscrew, and helps avoid any possible damage caused to the glass by preventing it from leaning on the table.
Effortless connection - included LED/Fan hub
Flip the Lian Li logo plate at the rear to access the LED/Fan hub that supports 3 PWM fan headers and 3 LED headers (5V 3Pin ARGB) without dealing with cable clutter.
Note: Connect the hub to the motherboard to sync and control the devices connected to the hub via the motherboard software.
Advanced kit - tool-less hot-swappable SSD tray
Exclusively designed for the Q58, a tool-less hot-swappable SSD tray is located at the front top of the case. Simply open the top and front panel to quickly remove or replace the SSD without unplugging any cables.
Flexible cooling support
In SFX PSU mode, the Q58 has room for a 280mm AIO. Depending on the mounting configuration, the actual supported length of the AIO varies.
1. Radiator directly mounts on the top fan bracket
2. Radiator mount below the fan
3. Radiator mount below the fan + removed from SSD tray.
In ATX PSU mode, the Q58 has room for a 120mm AIO.
Uncompromised storage space
The ingenious use of the room in the Q58 allows for 4 storage drive mounting locations. Drive support includes 4 x 2.5" SSDs, or 23 x 2.5" SSDs and 1 x 3.5" HDD.
Compact yet spacious GPU support with riser cable
The Q58 implements a PCI-E 3.0 riser cable to vertically mount a GPU of up to 3 slots thick and 320mm long.
Note: When using a PCI-E 4.0 ready motherboard, GPU and CPU in the PCI-E version of the Q58, please access the motherboard BIOS and set the PCI-E status from auto mode or Gen 4 mode to Gen 3 mode prior to mounting it in the case.
Q58 tested compatible list of GPU length 320mm (±3mm):
ASUS ROG-STRIX-RTX3080-O-10G - X
MSI GeForce RTX 3080 GAMING X TRIO 10G - ?
ZOTAC GAMING GeFroce RTX 3080 Trinity OC - ?
Gigabyte GeForce RTX 3080 Vision OC 10G - ?
Note: When installing a GPU of nearly 320mm in length, the space between the GPU and the inner side of the IO might be tight, thus the installation might need more time and some fit-in-angle adjustment.
USB 3.1 Type-C port
The Q58 I/O ports are located at the front panel and feature a Type-C port with efficient transmission speeds.
Comprehensive cable management
Several velcro straps and multiple cable tie-down points are provided to tidy up the cables and the bottom fan bracket helps to snuggle the cables into the Q58.
Stop the dust
Two magnetic dust filters are attached at the bottom of the chassis and the mesh panels to prevent dust from entering the case.
Note: Feature images are for illustrative purposes only. Please refer to title, description, product images, and specifications for correct model upon purchasing.
|PRODUCT NAME||LIAN LI Q58|
|RISER CABLE GENERATION||PCIe3.0|
|DIMENSIONS||(D) 342mm x (W) 170mm x (H) 250mm|
|SPCC Steel Interior|
|3.0mm tinted tempered glass side panels|
|FAN SUPPORT||SFX PSU Mode:|
|Top?2x 120mm or 2x 140mm|
|ATX PSU Mode:|
|Top?1x 120mm or 1x 140mm|
|RADIATOR SUPPORT||SFX PSU Mode:|
|Top?1x 240mm or 280mm|
|(Max length 315mm, or max 325mm if remove front SSD tray)|
|ATX PSU Mode:|
|PSU SUPPORT||SFX/SFX-L/ATX (max length 160mm)|
|GPU LENGTH CLEARANCE||Max 320mm|
|CPU COOLER CLEARANCE||Max 67mm|
|DRIVE SUPPORT||SFX PSU Mode:|
|4x 2.5” SSD or 3x 2.5” SSD + 1x 3.5” HDD|
|ATX PSU Mode:|
|2x 2.5” SSD|
|I/O PORTS||1x USB 3.0, 1x USB 3.1 TYPE-C, 1x HD AUDIO|
|DUST FILTER||2 x bottom magnetic|