High performance design

Equipped with the Ultra-fine Mesh front panel, the G360A was designed to meet next gen cooling demands. It brings high-end cooling capabilities with 360 radiator support in the front and top of the chassis, 7 fan locations and plenty of clearance for large GPUs.

Integrated lighting

Equipped with its own Digital-RGB controller, the Eclipse G360A makes lighting easy. It’s software-free with manual control and programmed with tasteful lighting effects out of the box. Three Digital-RGB 120mm fans are pre-installed and a LED strip is integrated along the tempered glass panel. Like all of Phanteks’ lighting products, the Digital-RGB controller can be expanded with more lighting products and/or synced with motherboards to allow for software control.

Front cooling support

The Eclipse G360A front chassis was carefully designed to provide the necessary clearance for 360 radiators, fans and large graphics cards while also making installation easy with the front fan brackets. The front fan brackets can be removed to allow fan and radiator installation outside of the chassis while the front panel has 31 mm of clearance so fans can be installed in front of the chassis to increase the GPU length clearance.

Cooling configurations

Being a relatively compact ATX mid-tower, the Eclipse G360A offers significant cooling capacity to tackle modern hardware cooling requirements. These are four different cooling configurations that utilize the available cooling options in different ways.

D-RGB lighting that just works

At Phanteks we believe that the integrated lighting solution should just work. Therefore we spend a lot of time programming the Digital-RGB controller with tasteful lighting effects that can be controlled manually, software-free. Compatibility is important however which is why all D-RGB equipped chassis from Phanteks contain the connectors to expand with more Phanteks D-RGB lighting products as well as third-party D-RGB lighting products and to (optionally) sync with the motherboard to control the lighting via software.

Motherboard support

The Eclipse G360A supports the following motherboard sizes: Mini-ITX, mATX, ATX and E-ATX (up to 280 mm wide)

Fan & radiator support

Top: Up to 360 radiator (122 x 398 mm with 42 mm RAM height clearance) Front: Up to 360/280 radiator (360: 122 x 398 x 65 mm / 280: 142 x 330 mm) Rear: 120 radiator

Note: It is not possible to install a 360mm radiator at the top and front simultaneously.

Storage support

Out-of-the-box, the Eclipse G360A offers space for 2 x 2.5’’ SSD’s in the preinstalled SSD brackets. Next to that there is space for 2 x 3.5’’ HDDs (which can also house 2 x 2.5’’ SSD’s instead). There is one more space for an extra 2.5’’ bracket which can be purchased seperately.

PSU support

Depending on the position of the HDD brackets, there is 220 or 280 mm PSU clearance.

GPU support

The maximum supported length of the GPU is 400 mm.

CPU cooler support

The maximum supported CPU cooler height is 162 mm.

Note: Feature images are used for illustrative purposes only, please refer to title, product images and thumbnail for correct model upon purchasing.