₹19,999
12,390
You Save : ₹7609 (38%)
Offer ends in...
 SLIDE IN |
 1.6” LCD SCREEN |
 STABLE MOTOR |
 ENLARGED INFINITY MIRROR |
 DUAL ZONE LIGHTING EFFECTS |
 L-CONNECT 3 SOFTWARE |
Elevate your PC setup with UNI FAN TL LCD black and white fans, available in 120mm and 140mm sizes with normal and reverse blades.
 Normal Blade |
 Reverse Blade |
Meet all kinds of configuration needs with our full lineup.
Note: Do not mount the fan with the LCD facing inward, as it may result in damage to the screen.
The world’s 1st PC case fan with a LCD screen, which can be personalized and controlled using L-Connect 3.
Power PCIe Cable
400 × 400 Resolution
500 (TYP) nits Brightness
IPS Type Display
SRGB-24-bit Full Color
Monitor the temperature and loading of your CPU and GPU, as well as the fan speed, instantly with built-in hardware monitor dashboards on the screen.
Note: The more sensors used, the higher the CPU load will be. We suggest you to keep sensor display at a maximum of 3.
Elevate your system’s style by uploading your own personalized MP4 / GIF / JPG / PNG.
Building on the design success of the UNI FAN series interlocking system, the UNI FAN TL series takes clutter-free setups to the next level.
 |
 Durable Daisy-Chain Solution Experience a hassle-free setup with the slide-in daisy-chaining mechanism, securely holding the fans in place and ensuring a snug fit for easy configuration. |
 |
 Seamless Connection A single cable is all you need to connect a group of up to 3 TL LCD fans to the controller, which supports a maximum of 7 TL LCD fans per controller, with a group of 3 on each port (up to 16 TL+TL LCD fans in total). To operate 8 to 12 TL LCD fans, please use 2 controllers simultaneously. Note that L-Connect 3 doesn’t support more than 13 TL LCD fans. Note: The controller cable is only applicable on the pin side of the fan, do not install it the other way. |
 |
 Well-Adapted for all Configurations The interlocking key at the end of TL LCD fans is removable for enhanced compatibility and less interference with other components. |
UNI FAN TL LCD is engineered for stable fan blade operation, ensuring efficiency at a low noise level.
|
METAL BEARING SHELL |
MAGNETIC RUBBER RING |
STATOR |
 BRAZZ NUT |
 FLUID DYNAMIC BEARING (FDB) |
 SHAFT AND COPPER BASE |
 THICKER FAN FRAME |
 RUBBER PADS |
Redefining PC cooling experience with a fan that doesn’t compromise on thermal control, all while offering a personalized screen for a touch of individuality.
| MODEL | AIRFLOW | STATIC PRESSURE | NOISE |
|---|---|---|---|
| TLLCD120 | 62 CFM | 2.9 mmH20 | 27 dB(A) |
| TLLCD120 Reverse | 54.3 CFM | 2.83 mmH2O | 31 dB(A) |
| TLLCD140 | 68.1 CFM | 3.5 mmH2O | 28.5 dB(A) |
| TLLCD140 Reverse | 64 CFM | 3.1 mmH2O | 29.4 dB(A) |
Able to set different fan speeds for each fan cluster to optimize different scenarios of use providing flexibility for radiator or case fan needs with L-Connect 3.
Each UNI FAN TL fan has 26 LEDs with an elegant side diffuser on the 2 sides of the fan frame that wraps around the edges of the anti-vibration pad.
Illuminate your setup with the UNI FAN TL’s enlarged infinity mirror (30% larger than UNI FAN SL-INF on the side) on both sides of the frame, showcasing clear and 0.7mm gap multi-layer lighting effects.
Easily customize different lighting effects on the two sides of the LED strips using L-Connect 3 for a unique setup. You can also sync your TL fans and apply the same lighting effect you like across all of them.
Cover the screws with anti-vibrate rubber pads for a seamless and uninterrupted aesthetic appeal.
L-Connect 3 offers complete control over the UNI FAN TL series, including the lighting effects, fan speed, and LCD screen.
UNI FAN TL and TL LCD share the same controller, enabling the connection of up to 16 TL and TL LCD fans simultaneously, with a maximum of 7 TL LCD fans.
Note: TL and TL LCD share the same controller but use different controller cables. Do not mix the controller cables.
Fan Group Signal
Each port supports a maximum of 10 TL fans or 3 TL LCD fans
Note: The 1st port doesn’t support TL LCD.
|
Power PCIe Cable |
USB Cable |
5V ARGB / 4 PIN PWM Cable Note: The controller is available separately or in a triple pack only. UNI FAN TL series fans without the controller will not be functional. |
 UNI FAN TLLCD120 Black Triple Pack |
 UNI FAN TLLCD120 White Triple Pack |
| SPECIFICATIONS | |
| PRODUCT NAME | UNI FAN TL LCD 120 |
| MODEL | 12TLLCD3W |
| COLOR | White |
| NUMBER OF FANS | 3 |
| CONTROLLER | Yes |
| CONNECTOR TYPE | UNI FAN Controller Cable x 1 (P-7P) |
| FAN DIMENSION | 124 x 120 x 28 mm |
| FAN SPEED | 0, 350~1900 RPM |
| MAX. AIR PRESSURE | 2.9 mmH2O (Maximum) |
| MAX. AIRFLOW | 62 CFM (Maximum) |
| ACOUSTIC NOISE | 27 dB(A) Max |
| INPUT POWER | 7.08W |
| MATERIAL | PA66 / PBT |
| RATED VOLTAGE | DC 12V (FAN) & 5V (LED) |
| BEARING TYPE | Fluid Dynamic Bearing (FDB) |
| OPERATE VOLTAGE | DC12V & 5V |
| WARRANTY | 3 years |
